|Copyright 2007 YSL Holdings Pte. Ltd. (Co. Regn. No. 198403265C)
"Come out of the dark and into Laserlite"
Switch on to Laserlite. It's great for almost any area around the home
where you want protection from the weather but allow in the light.
Pergolas, carports, fences, wind breaks or screens around patios,
porches and pools, in fact anywhere you want turned into a sheltered
place, but not a dark place.
Side overlaps will gently be slightly more the one corrugations due to the different points form where the
corrugations start and end. End overlaps must not be less than 150mm and no more than 250mm. Where the
roof pitch is below 10° end overlaps should be:
* Increased to the 250mm maximum
* Sealed with a bead of neutral curing silicone
To prevent sagging, locate end overlaps over purlins.
Overhang at roof edge should be 50mm. Important: Where Laserlite is used with corrugated metal, always lap
under the metal.
Fire performance testing has been undertaken in accordance with Australian Standard "Fire Tests on Building
Materials and Structures - Test for Early Fire Hazard Properties of Materials" (AS 1530, Part 3 - 1982).
The results for Laserlite PVC sheeting are :
The O spread of flame index indicates that once the ignition source is removed, further burning does not occur,
i.e. the material is self-extinguishing.
|PVC ROOFING SHEET : LASERLITE
|No.14, Third Chin Bee Road, Singapore 618690 Tel: (65) 6743 5511 Fax: (65) 6746 0113 Email: firstname.lastname@example.org